Shear

This tool determine the shear force, bending moment and deflection of a single-span beam with different types of applied loading. The calculators are for a simply supported beam or a cantilever beam.

This technical report checks each bolt in a bolt group for in-plane and out-of-plane loads using the Instantaneous Centre of Rotation (ICR) concept. It then checks the shear force, pull-out force, and combined action. All calculations are carried out based on Australian Standard AS4100:2020.

This tool analyzes and checks each fillet weld in a weld group for in-plane loading using the Instantaneous Center of Rotation (ICR) concept. Then, the shear force at each end of each weld line is checked to ensure that the critical design shear is considered. All calculations are performed in accordance with AS 4100:2020.

Using this tool, you can visualize the shear force, bending moment, and deflection of a simply supported beam when a point load is applied at any point on the beam.

This tool calculates the shear capacity of a suspended flat slab at a concentrated load. This situation is often referred to as 'Punching Shear'. Calculations are performed in accordance with AS 3600-2018.