Beams

This tool calculates he moment of inertia for hollow circular section. Enter the outside diameter and thickness of your section to get the results.

This tool analyzes steel beams and columns under axial loads and uniaxial or biaxial bending. The result is a Stress Ratio, which compares the actual stress to the allowable stress. Calculations are based on the American Institute of Steel Construction's Specification for Structural Steel Buildings-Allowable Stress Design and Plastic Design, 1989.

Using this tool, you can visualize the shear force, bending moment, and deflection of a simply supported beam when a point load is applied at any point on the beam.

Calculate the flexural and shear design capacity of a reinforced concrete section, according to Australian Standards.

This template is used to analyze and design reinforced concrete beams. It considers applied axial, shear, and moments and checks all ULS and SLS load combinations. It checks the moment and shear capacities, deflections, as well as the minimum depth, cover, and reinforcement required based on ACI 318-19 and ASCE 7-22 standards.

This tool designs standard steel sections by calculating the flexural and axial design capacities using Ultimate Limit State (ULS) methods. The calculations comply with AS 4100-2020.

This tool designs timber members in bending, such as rafters and joists, by ensuring that the beam meets flexural and shear requirements according to Ultimate Limit State (ULS) methods. Calculations are performed in accordance with AS 1720.1-2010.